ASSESSMENT OF THE DEPENDENCE OF SHIP POWER PLANTS EXHAUST GASES PURIFICATION DEGREE ON CORROSION RESISTANCE AND THE AMOUNT OF THE CATALYTIC MATERIAL COMPOSITION

  • Nina N. Gorlova Polzunov Altai State Technical University, Barnaul, Altai Territory, Russia
  • Gennady V. Medvedev Polzunov Altai State Technical University, Barnaul, Altai Territory, Russia

Abstract

A significant negative impact on the environmental components (atmosphere and hydrosphere) is provided by water transport as a result of the use of “heavy” fuels and the lack of effective exhaust gas purification systems. One of the technologically and cost-effective is the cleaning of spent marine power plants using catalytic converters. An optimal degree of purification of exhaust gases from sulfur and nitrogen compounds is ensured by using catalytic materials in porous permeable SHS purification systems.

Keywords: ships, power plants, catalytic neutralization, corrosion resistance

References

Живлюк Г.Е. Экологическая безопасность судовых ДВС. Выбор эффективного способа соответствия новым требованиям 2020 г. По выбросам серы / Г.Е. Живлюк, А.П. Петров // Вестник Государственного университета морского и речного флота имени адмирала С.О. Макарова. – 2019. – №4(56). – C. 727–744. DOI: 10.21821/2309-5180-2019-11-4-727-744

Петров А.П. Экологическая безопасность. Ограничение выбросов серы судовыми энергетическими установками / А.П. Петров, Г.Е. Живлюк // Вестник Государственного университета морского и речного флота имени адмирала С.О. Макарова. – 2019. – №1(53). – C. 130–145. DOI: 10.21821/2309-5180-2019-11-1-130-145

Международная Конвенция по предотвращению загрязнения с судов = International Convention for Prevention of Pollution from Ships: VFHGJK/ Кн. III. – пересмотр. изд. - Санкт-Петербург: ЦНИИМФ, 2012. -336 с.

Jerzy Herdzik. Emissions from marine engines versus imo certification and requirements of Tier 3/ Journal of KONES Powertrain and Transport, Vol. 18, No. 2, 2011. – р. 161–167.

C.F. Heuberger, I. Staffell, N. Shah and N. Mac Dowell, Energy Environ. Sci., 2016, 9, 2497 -2510 RSC. https://doi.org/10.1039/c6ee01120a

M. Bui, C.S. Adjiman, A. Bardow, E.J. Anthony, A. Boston, S. Brown, P.S. Fennell, S. Fuss, A. Galindo, L.A. Hackett, J.P. Hallett, H.J. Herzog, G. Jackson, J. Kemper, S. Krevor, G.C. Maitland, M. Matuszewski, I.S. Metcalfe, C. Petit, G. Puxty, J. Reimer, D.M. Reiner, E.S. Rubin, S.A. Scott, N. Shah, B. Smit, J. P. M. Trusler, P. Webley, J. Wilcox and N. Mac Dowell, Energy Environ. Sci., 2018, 11, 1062 -1176 RSC. https://doi.org/10.1039/c7ee02342a

P.J. Bonitatibus Jr., S. Chakraborty, M.D. Doherty, O. Siclovan, W.D. Jones and G.L. Soloveichik, Proc. Natl. Acad. Sci. U. S. A., 2015, 112, 1687 -1692 CrossRef PubMed. https://doi.org/10.1073/pnas.1420199112

M. Pena-Lopez, H. Neumann and M. Beller, ChemCatChem, 2015, 7, 865–871 CrossRef CAS .

E.A. Bielinski, M. Forster, Y. Zhang, W.H. Bernskoetter, N. Hazari and M.C. Holthausen, ACS Catal., 2015, 5, 2404 -2415 CrossRef CAS .

Kolomeets M.A. Porous SHS-materials based on iron oxide and aluminum with additions of alloying elements / M.A. Kolomeets, A.V. Maetskii, T.V. Novoselova [et al.] // Refractories and Industrial Ceramics. – 2017. – Vol. 58, № 3. – p. 293–298. https://doi.org/10.1007/s11148-017-0099-7

Porous Permeable SHS Cermets Based on Iron and Aluminum Oxides. T.V. Novoselova, L.V. Tolmacheva, Yu.G. Chernega, M.A. Kolomeets, A.V. Maetskii, N.P. Tubalov, O.V. Yakovleva., 2017, published in Vestnik Mashinostroeniya, 2017, No. 12, p. 64–69. https://doi.org/10.3103/s1068798x18030139

Shyan L.C., Chun H.L. Combustion Synthesis of Aluminum Nitri de: a review // Key Eng. Mat. – 2012. – V. 521 – p. 101–111.

Untersuchung der Eigenschaften neuer Dieselpartikellifter. Boger Thorsten, Rose Domenik, Cutler Willard A., Heibel Achim K., Tennent David L. (Corning GmbH, Wiesbaden). MTZ: Motorfreim. Z. 2005, 66. № 9, p. 660–669. https://doi.org/10.1007/bf03226766

Kamyshov Yu.N., Medvedev G.V., Gorlova N.N. Purification of marine diesel exhaust gases by means of porous permeable corrosion-resistant materials. Transactions of the Krylov State Research Center. 2019; Special Edition 2: 187–197. https://doi.org/10.24937/2542-2324-2019-2-s-i-187-197

Горлова Н.Н. Обеспечение коррозионной стойкости пористых проницаемых каталитических СВС – материалов оптимальным составом и его заданными функциональными свойствами/ Н.Н. Горлова// Ползуновский альманах.– 2017.– № 3. – Т.1.– С. 134–137.

Author Biographies

Nina N. Gorlova , Polzunov Altai State Technical University, Barnaul, Altai Territory, Russia

Candidate of Engineering Sciences, Associate Professor Department of ground transportation and technological systems, Polzunov Altai State Technical University, 46, Lenin Av., Barnaul, Altai Territory, Russia, 656038, Russia, e-mail: Gnn.09@mail.ru

Gennady V. Medvedev , Polzunov Altai State Technical University, Barnaul, Altai Territory, Russia

Candidate of Engineering Sciences, Associate Professor Department of ground transportation and technological systems, Polzunov Altai State Technical University, 46, Lenin Av., Barnaul, Altai Territory, 656038, Russia, e-mail: Genatswaly@mail.ru

Published
01-06-2020
How to Cite
Gorlova, N. N., & Medvedev, G. V. (2020). ASSESSMENT OF THE DEPENDENCE OF SHIP POWER PLANTS EXHAUST GASES PURIFICATION DEGREE ON CORROSION RESISTANCE AND THE AMOUNT OF THE CATALYTIC MATERIAL COMPOSITION. Russian Journal of Water Transport, (63), 183-192. https://doi.org/10.37890/jwt.vi63.88
Section
Operation of ship power equipment