Analysis of calculations when creating a theoretical drawing of a tug by the interpolation method
Abstract
The development of a theoretical drawing by manual methods is notable for considerable laboriousness, in this regard, the use of methods that significantly reduce the development time and increase its quality is relevant. In this work, a comparative analysis of methods for obtaining ordinates of a theoretical drawing is carried out. The existing methods of computer-aided design and methods of forming a theoretical drawing are considered: classical, interpolation, affine transformation method, modular method. The process of development of the surface of the tug by the interpolation method is shown, the substantiation of its application is carried out. On the basis of the developed model, a program for calculating the ordinates of the theoretical drawing of tugboats was developed. The results of the software package operation are presented, namely, the ordinates of the theoretical drawing of the tugboat and the hull of the theoretical drawing, as well as the analysis of the calculation accuracy. The adopted approach to the development of the ship's surface can significantly reduce the time and cost of design work on the development of the ship's surface, can be used for its further automation and use as scientific, industrial and educational purposes.
References
Ашик В.В. Проектирование судов / В.В. Ашик — 2-е изд., перераб. и доп. — Л.: Судостроение, 1985. — 318 с.
Богданов Б.В., Слуцкий А.В. и др. Буксирные суда. – Л.: Судостроение, 1974. – 280 с.
Богданов Б.В. Толкачи и баржи для толкания / Б.В. Богданов- Москва, 1959-239 с.
Богданов Б.В., Алчуджан Г.А. и др. Проектирование толкаемых составов и составных судов. – Л.: Судостроение, 1981. – 224 с
Алчуджан Г.А. Мощные буксиры зарубежного флота-Информационный сборочник ЦНИИМФ,1963, вып. 95, с 52-67.
Роннов Е.П., Любимов В.И. Особенности проектирования толкаемых составов внутреннего плавания. Методическое пособие. – Н. Новгород. Изд-во ГОУ ВПО ВГАВТ. 2003. – 32 с.
Caldwell A., Screw tug design, London 1946, 154с.
Давыдова С. В. Автоматизация генерации ординат теоретического чертежа интерполяционным методом «Вестник ВГАВТ» №56 2018.
Ашик В.В. Интерполяционный способ построения теоретического чертежа. Судостроение, 1962, № 2, с. 9-11.
J. Berg, J. Lefstrom. Interpolation spaces. Introduction 1980 264 p.
Kagan V. F. Fundamentals of the theory of surfaces in tensor presentation. - 2013. - 518 p. 12. Cliff W. Estes (BaseLine Technology), Rhinoceros Advanced Training Series. Marine Design (http://www.yugzone.ru/x/rhinoceros-advanced-training-series/)
Groon D.J. Desinging curved surface with analitical functions. Computer Aided Desinging, 1977, v/ 9, p. 3-8.
David F. Rogers: An Introduction to NURBS with Historical Perspective, Morgan Kaufmann Publishers 2001.
Фомин Б. Rhinoceros. NURBS моделирование для Windows. Изд.: Robert McNeel & Associates 2006 289 с.
Copyright (c) 2021 Russian Journal of Water Transport
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.