Сравнительный анализ создания теоретического чертежа в программах  «Ткорпус» и «FreeShip»

Svetlana V. Davydova; Konstantin P. Mochalov

doi:10.37890/jwt.vi72.276

Svetlana V. Davydova Volga State University of Water Transport, Nizhny Novgorod, Russia https://orcid.org/0000-0003-1310-6157
Konstantin P. Mochalov Volga State University of Water Transport, Nizhny Novgorod, Russia

DOI: https://doi.org/10.37890/jwt.vi72.276

Abstract

The development of the ordinates of the theoretical drawing in most programs is carried out by the interpolation method for prototype vessels. If there are no prototypes or not enough, then the development of ordinates can be carried out by the method of affine transformations, for which one prototype vessel is sufficient. The paper presents a comparative analysis of the creation of the ordinates of the theoretical drawing in the programs «Tkorpus» and «FreeShip». The process of developing the ordinates of a theoretical drawing of a tugboat is shown in the program «Tkorpus», using the interpolation method of constructing ordinates and in the program «FreeShip», using the method of affine transformations. A comparative analysis of the obtained ordinates of theoretical drawings is carried out. The programs can be used together: «Tcorpus» to obtain the ordinates of the theoretical drawing, «FreeShip» to edit the surface of the theoretical drawing. Both programs allow you to quickly obtain the ordinates of the theoretical drawing, which reduces the time at the initial stage of the design of the vessel.

Keywords: shipbuilding, software package, interpolation, approximation, affine transformations, construction of a theoretical drawing, towing vessel, ship surface, analysis of results

References

1. J. Berg, J. Lefstrom Interpolation spaces [Interpolation spaces] Introduction, 1980, 264 p.
2. Cliff W. Estes (BaseLine Technology) [Rhinoceros Advanced Training Series] Marine Design.
3. Groon D.J. Desinging curved surface with analitical functions [Computer Aided Desinging] 1977, p. 3–8.
4. David F. Rogers. [An Introduction to NURBS with Historical Perspective] Morgan Kaufmann P. 2001.
5. Kagan V. F. [Fundamentals of the theory of surfaces in tensor presentation] 2013. – 518 p.
6. Богданов Б.В., Слуцкий А.В. и др. Буксирные суда. – Л.: Судостроение, 1974. – 280 с.
7. Ашик В.В. Проектирование судов / В.В. Ашик – 2-е изд., перераб. и доп. – Л.: Судостроение, 1985. – 318 с.
8. Давыдова С. В. Автоматизация генерации ординат теоретического чертежа интерполяционным методом / Вестник ВГАВТ. 2018. №56. 217 – с. URL: http://journal.vsuwt.ru/public/v_arc/v56.pdf. (дата обращения 22.05.2022).
9. Давыдова С. В., Андриянов И. В. Анализ расчетов при создании теоретического чертежа буксира интерполяционным методом / Вестник ВГАВТ. 2021. №67. DOI: 10.37890/jwt.vi67.191.

Author Biographies

Svetlana V. Davydova , Volga State University of Water Transport, Nizhny Novgorod, Russia

Ph.D. in Engineering Science, Associate Professor, Volga State University of Water Transport, 5, Nesterova street, Nizhny Novgorod, Russia, 603950, e-mail: kaf_ptps@vsuwt.ru

Konstantin P. Mochalov , Volga State University of Water Transport, Nizhny Novgorod, Russia

student of the Department of «Design and shipbuilding technology», Volga State University of Water Transport, 5, Nesterov st, Nizhny Novgorod, 603951, e-mail: kaf_ptps@vsuwt.ru

Comparative analysis of the creation of a theoretical drawing in the programs «Tkorpus» and «FreeShip»

Abstract

References

Author Biographies

Most read articles by the same author(s)